|
学術論文誌の査読付論文および著書です.
- Chen Meiyun, Takahashi Satoru, Takamasu Kiyoshi: Calibration for the sensitivity
of multi-beam angle sensor using cylindrical plano-convex lens, Precision
Engineering 46, 2016, 254-262 [PDF File]
- Dong Wei, Kiyoshi Takamasu, Hirokazu Matsumoto: Is the Two-Color Method
Superior to Empirical Equations in Refractive Index Compensation?, Optics
and Photonics Journal 2016 (6), 2016, 8-13 [PDF File]
- Chen Meiyun, Takahashi Satoru, Takamasu Kiyoshi: Multi-Beam Angle Sensor for Flatness Measurement of Mirror using Circumferential Scan Technology, International Journal of Precision Engineering and Manufacturing 17 (9), 2016, 1093-1099 [PDF File]
- Taro Onoe, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto: Non-contact
precision profile measurement to rough-surface objects with optical frequency
combs, Measurement Science Technology 27, 2016, 124002-1-7 [PDF File]
- Wiroj Sudatham, Hirokazu Matsumoto, Satoru Takahashi, Kiyoshi Takamasu:
Verification of the positioning accuracy of industrial coordinate measuring
machine using optical-comb pulsed interferometer with a rough metal ball
target, Precision Engineering 41, 2015, 63-67[PDF File]
- S. Takahashi, Y. Horita, F. Kaji, Y. Yamaguchi, M. Michihata, K. Takamasu:
Concept for laser-assisted nano removal beyond the diffraction limit using
photocatalyst nanoparticles, CIRP Annals - Manufacturing Technology 64,
2015, 201-204[PDF File]
- 工藤良太, 高橋哲, 高増潔:変調照明シフトによる超精密加工表面の超解像光学式欠陥計測に関する研究(第3報)−コヒーレント結像逐次再構成型超解像法の原理−,精密工学会誌
81 (6),2015,562-569[PDF File]
- Meiyun Chen, Satoru Takahashi, Kiyoshi Takamasu: Development of high-precision micro-roundness measuring machine using a high-sensitivity and compact multi-beam angle sensor, Precision Engineering 42, 2015, 276-282[PDF File]
- 工藤良太, 高橋哲, 高増潔:変調照明シフトによる超精密加工表面の超解像光学式欠陥計測に関する研究(第4報)−コヒーレント結像逐次再構成型超解像法の実験的検証−,精密工学会誌
81 (7),2015,684-691[PDF File]
- Hirokazu Matsumoto, Kiyoshi Takamasu: Automatic Recording Absolute Length-Measuring
System with Fast Optical-Comb Fiber Interferometer, International Journal
of Automation Technology 9 (5), 2015, 482-486[PDF File]
- 堀田陽亮,吉越久倫,松田恵介,道畑正岐,高増潔,高橋哲:レーザー集光点近傍における光触媒反応を利用した三次元微細構造創製に関する研究,日本機械学会論文集81 (832),2015,15-309 1-13[PDF File]
- Kenji Maruno, Masaki Michihata, Yasuhiro Mizutani, Yasuhiro Takaya: Fundamental
study on novel on-machine measurement method of cutting tool edge profile
based on fluorescent confocal microscope, International Journal of Automation
Technology 10 (1), 2016, 106-113[PDF File]
- Wiroj Sudatham, Hirokazu Matsumoto, Satoru Takahashi, Kiyoshi Takamasu:
Non-contact measurement technique for dimensional metrology using optical
comb, Measurement 78, 2016, 381-387[PDF File]
- Wiroj Sudatham, Hirokazu Matsumoto, Satoru Takahashi, Kiyoshi Takamasu: Diagonal in space of coordinate measuring machine verification using an optical-comb pulsed interferometer with a ball-lens target, Precision Engineering 43, 2016, 486-492[PDF File]
- S. Takahashi, H. Yokozeki, D. Fujii, R. Kudo, K. Takamasu: A novel dark
field in-process optical inspection method for micro-openings on mirrored
surfaces beyond the diffraction limit using active phase control, CIRP
Annals - Manufacturing Technology 63, 2014, 465-468[PDF File]
- Kyohei Ishikawa, Tomohiko Takamura, Muzheng Xiao, Satoru Takahashi, Kiyoshi Takamasu: Profile measurement of aspheric surfaces using scanning deflectometry and rotating autocollimator with wide measuring range, Measurement Science and Technology 25 (6), 2014, 064008 1-7
[PDF File]
- Hisamichi Yoshigoe, Shotaro Kadoya, Satoru Takahashi, Kiyoshi Takamasu: Fabrication and Composition Control of Three-Dimensional Dielectric Metal Microstructure Using Photocatalyst Nanoparticles, International Journal of Automation Technology 8 (4), 2014, 523-529
[PDF File]
- Hiroki Yokozeki, Ryota Kudo, Satoru Takahashi, Kiyoshi Takamasu: Lateral resolution improvement of laser-scanning imaging for nano defects detection, Advanced Optical Technologies 3 (4), 2014, 425-433
[PDF File]
- Narin Chanthawong, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto: Performance evaluation of a coordinate measuring machine’s axis using a high-frequency repetition mode of a mode-locked fiber laser, International Journal of Precision Engineering and Manufacturing 15 (8), 2014, 1507-1512
[PDF File]
- Dong Wei, Kiyoshi Takamasu, Hirokazu Matsumoto: Length Traceability using Optical Frequency Comb, Key Engineering Materials 625, 2014, 322-325
[PDF File]
- Narin Chanthawong, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto: High-accuracy calibration of CMM using temporal-coherence fiber interferometer with fast-repetition comb laser, Key Engineering Materials 625, 2014, 66-72
[PDF File]
- Dong Wei, Masato Aketagawa, Kiyoshi Takamasu, Hirokazu Matsumoto: Two-color absolute length measuring method based on pulse repetition interval lengths, Optical Engineering 53 (12), 2014, 122413 1-5
[PDF File]
- Wiroj Sudatham, Hirokazu Matsumoto, Satoru Takahashi, Kiyoshi Takamasu: Verification of the positioning accuracy of industrial coordinate measuring machine using optical-comb pulsed interferometer with a rough metal ball target, Precision Engineering 41, 2015, 63-67[PDF File]
- 大西徹,中西正一,高増潔:現場環境における三次元測定機の高度化に関する研究(第4報)−回転式プロービングシステムの評価−,精密工学会誌79 (4),
2013, 338-343 [PDF File]
- S. Takahashi, Y. Ikeda, K. Takamasu: Study on nano thickness inspection for residual layer of nanoimprint lithography using near-field optical enhancement of metal tip, CIRP Annals - Manufacturing Technology 62, 2013, 527?530 [PDF File]
- Muzheng Xiao, Tomohiko Takamura, Satoru Takahashi, Kiyoshi Takamasu: Random error analysis of profile measurement of large aspheric optical surface using scanning deflectometry with rotation stage, Precision Engineering 37, 2013, 599-605
[PDF File]
- Xiaonan Wang, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto: Spatial positioning measurements up to 150 m using temporal coherence of optical frequency comb, Precision Engineering 37, 2013, 635-639
[PDF File]
- Dong Wei, Kiyoshi Takamasu, Hirokazu Matsumoto: A study of the possibility of using an adjacent pulse repetition interval length as a scale using a Helium-Neon interferometer, Precision Engineering 37, 2013, 694?698
[PDF File]
- Kyohei Ishikawa, Tomohiko Takamura, Muzheng Xiao, Satoru Takahashi, Kiyoshi
Takamasu: Profile measurement of aspheric surfaces using scanning deflectometry
and rotating autocollimator with wide measuring range, Measurement Science
and Technology 25, 2014, 064008 1-7 [PDF File]
- 高増潔,高橋哲(一部執筆):石原直,加藤千幸,光石衛,渡邉聡(編)ナノ・マイクロスケール機械工学,東京大学出版,2014 [PDF File]
- R. Kudo, S. Usuki, S. Takahashi, K. Takamasu: Influence of standing wave
phase error on super-resolution optical inspection for periodic microstructures,
Meas. Sci. Technol. 23, 2012, 054007 1-13 [PDF File]
- Dong Wei, Nan Wu, Kiyoshi Takamasu, Hirokazu Matsumoto: Remote Internal Diameter Measurement of Ring Gauge based on a Low-coherence Tandem Scheme, Key Engineering Materials Vol. 516, 2012, 533-538
[PDF File]
- S. Takahashi, Y. Kajihara, K. Takamasu: Submicrometer thickness layer fabrication for layer-by-layer microstereolithography using evanescent light, CIRP Annals - Manufacturing Technology 61, 2012, 219-222
[PDF File]
- Takayuki Kurihara, Ryuichi Sugimoto, Ryota Kudo, S. Takahashi, K. Takamasu: Height measurement of single nanoparticles based on evanescent field modulation, International Journal of Nanomanufacturing, Vol. 8, Nos. 5/6, 2012, 419-430
[PDF File]
- Agustinus Winarno, Satoru Takahashi, Akiko Hirai, Kiyoshi Takamasu, Hirokazu Matsumoto: Absolute measurement of gauge block without wringing using tandem low-coherence interferometry, Meas. Sci. Technol. 23, 2012, 125001 1-8
[PDF File]
- 工藤良太,高橋哲,高増潔:半導体ベアウエハ表面ナノ欠陥の超解像光学式計測に関する研究,砥粒加工学会誌 Vol.56 No.10, 2012,
709-710
[PDF File]
- Takahiro Sekino, Satoru Takahashi, Kiyoshi Takamasu: Fundamental study
on nanoremoval processing method for microplastic structures using photocatalyzed
oxidation, Key Engineering Materials Vols. 523-524, 2012, 610-614
[PDF File]
- Kenta Matsui, Hirokazu Matsumoto, Satoru Takahashi, Kiyoshi Takamasu: New Non-contact Measurement of Small Inside-diameter Using Tandem Low-coherence Interferometer and Optical Fiber Devices, Key Engineering Materials Vols. 523-524, 2012, 871-876
[PDF File]
- Taro Onoe, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto: Development of a non-contact precision measurement technique using optical frequency combs, Key Engineering Materials Vols. 523-524, 2012, 877-882
[PDF File]
- Haruki Okito, Satoru Takahashi, Kiyoshi Takamasu: Sub-Nanometer Line Width and Line Profile Measurement Using STEM Images with Metal Coating, Key Engineering Materials Vols. 523-524, 2012, 957-960
[PDF File]
- D. Wei, K. Takamasu, H. Matsumoto: Synthetic adjacent pulse repetition interval length method to solve integer ambiguity problem: theoretical analysis, Journal of the European Optical Society-Rapid Publications, Vol. 8, 2013, 13016 1-6
[PDF File]
- D. Wei, K. Takamasu, H. Matsumoto: Temporal coherence shaping based on spectral-domain destructive interference of pulses with different self-phase modulations, Journal of the European Optical Society-Rapid Publications, Vol. 8, 2013, 13018 1-6
[PDF File]
- 高増潔(一部執筆):震災後の工学は何をめざすのか 第7章 工学の新しい潮流,東京大学大学院工学系研究科編,2012
- Ping Yang, Tomohiko Takamura, Satoru Takahashi, Kiyoshi Takamasu, Osamu Sato, Sonko Osawa, Toshiyuki Takatsuji: Development of high-precision micro-coordinate measuring machine: Multi-probe measurement system for measuring yaw and straightness motion error of XY linear stage, Precision Engineering Vol. 35, No. 2, 2011, 424-430
[PDF File]
- S. Takahashi, R. Kudo, S. Usuki, K. Takamasu: Super resolution optical measurements of nanodefects on Si wafer surface using infrared standing evanescent wave, CIRP Annals - Manufacturing Technology Vol. 60, 2011, 523-526
[PDF File]
- Ping Yang, Tomohiko Takamura, Satoru Takahashi, Kiyoshi Takamasu, Osamu Sato, Sonko Osawa, Toshiyuki Takatsuji: Multi-probe scanning system comprising three laser interferometers and one autocollimator for measuring flat bar mirror profile with nanometer accuracy, Precision Engineering Vol. 35, No. 3, 686-692
[PDF File]
- Xiaonan Wang, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto: Space position measurement using long-path heterodyne interferometer with optical frequency comb, Optics Express Vol. 20, No. 2, 2012, 2725-2732
[PDF File]
- Muzheng Xiao, Satomi Jujo, Satoru Takahashi, Kiyoshi Takamasu: Nanometer profile measurement of large aspheric optical surface by scanning deflectometry with rotatable devices: Uncertainty propagation analysis and experiments, Precision Engineering Vol. 36, No. 1, 2012, 91-96
[PDF File]
- Hirokazu Matsumoto, Xiaonan Wang, Kiyoshi Takamasu, Tomohiro Aoto: Absolute
Measurement of Baselines up to 403 m Using Heterodyne Temporal Coherence
Interferometer with Optical Frequency Comb, Applied Physics Express, 5,
046601, 2012, 1-3 [PDF File]
- Narin Chanthawong, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto:
A new method for high-accuracy gauge block measurement using 2 GHz repetition
mode of a mode-locked fiber laser, Measurement Science and Technology,
23, 054003, 2012, 1-6 [PDF File]
- 大西徹,高瀬省徳,高増潔:現場環境における三次元測定機の高度化に関する研究(第3報)−低熱膨張ブロックゲージを用いた温度補正の評価−,精密工学会誌
76(5),2010, 541-545 [PDF File]
- Kiyoshi Takamasu, Satoru Takahashi, Xin Chen: Uncertainty Estimation in
Intelligent Coordinate and Profile Measurement, Key Engineering Materials, Vols.
447-448, 2010, 564-568 [PDF File]
- Ping Yang, Shusaku Shibata, Satoru Takahashi, Kiyoshi Takamasu, Osamu Sato,
Sonko Osawa, Toshiyuki Takatsuji: A Multi-probe Measurement Method to Evaluate
the Yaw and Straightness Errors of XY Stage on High Precision CMM, Key
Engineering Materials, Vols. 447-448, 2010, 590-594 [PDF File]
- Muzheng Xiao, Satomi Jujo, Satoru Takahashi, Kiyoshi Takamasu: Profile
Measurement of Large Aspheric Optical Surface by Scanning Deflectometry with
Rotatable Optical Devices - Error Analysis and Pre-experiment -, Key Engineering
Materials, Vols. 447-448, 2010, 604-608 [PDF
File]
- S. Takahashi, K. Watanabe, K. Takamasu: A novel resist surface profilometer
for next-generation photolithography using mechano-optical arrayed probe system,
CIRP Annals - Manufacturing Technology, 59, 2010, 521-524 [PDF File]
- Keisuke Matsuda, Satoru Takahashi1, Kiyoshi Takamasu: Development of
In-process Visualization System for Laser-assisted Three-dimensional
Microfabrication using Photocatalyst Nanoparticles, International Journal of
Precision Engineering and Manufacturing, Vol. 11, No. 6, 2010, 811-815 [PDF File]
- 小谷 潔, 飯田 文明, 小川 雄太郎, 高増 潔, 神保 泰彦:Windkessel
modelを用いた姿勢の違いに起因する循環器動態変化の評価,電気学会論文誌C(電子・情報・システム部門誌),Vol. 131,
No.1,2011,140-145 [PDF File]
- Ryota Kudo, Shin Usuki, Satoru Takahashi, Kiyoshi Takamasu: Simulation-Based
Analysis of Influence of Error on Super-Resolution Optical Inspection, Int. J.
of Automation Technology Vol. 5, No. 2, 2011, 167-172 [PDF File]
- Dong Wei, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto:
Theoretical Analysis of Length Measurement Using Interference of Multiple Pulse
Trains of a Femtosecond Optical Frequency Comb, Japanese Journal of Applied
Physics 50(2), 2011, 022701-1-5 [PDF File]
- Dong Wei, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto:
Time-of-flight method using multiple pulse train interference as a time
recorder, Optics Express, Vol. 19, No. 6, 2011, 4881-4889 [PDF File]
- Y. Hori, A. Hirai, K. Minoshima, H. Matsumoto: High-accuracy interferometer
with a prism pair for measurement of the absolute refractive index of glass,
Applied Optics 48 (11), 2009, 2045-2050 [PDF File]
- H. Inaba, Y. Nakajima, FL. Hong, K. Minoshima, J. Ishikawa, A. Onae, H.
Matsumoto, M. Wouters, B. Warrington, N. Brown: Frequency Measurement Capability
of a Fiber-Based Frequency Comb at 633 nm, IEEE Transactions on Instrumentation
and Measurement 58 (4), 2009, 1234-1240[PDF File]
- Dong Wei, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto: Analysis
of the temporal coherence function of a femtosecond optical frequency comb,
Optics Express 17 (9), 2009, 7011-7018[PDF File]
- Wei Gao, Kiyoshi Takamasu, Yasuhiro Takaya, Satoru Takahashi: Guest Editors
of Special Issue: Advances in Intelligent Nano-Measurement Technology,
International Journal of Surface Science and Engineering 3 (3), 2009, 157-159[PDF File]
- Satoru Takahashi, Shuichi Minamiguchi, Toshiyuki Nakao, Shin Usuki, Kiyoshi
Takamasu: Study on residual resist layer thickness measurement for Nanoimprint
Lithography based on near-field optics, International Journal of Surface Science
and Engineering 3 (3), 2009, 178-194[PDF File]
- Dong Wei, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto:
Simultaneous Observation of High Temporal Coherence between Two Pairs of Pulse
Trains Using a Femtosecond-Optical-Frequency-Comb-Based Interferometer, Japanese
Journal of Applied Physics 48, 2009, 070211 1-3[PDF File]
- Dong Wei, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto:
Femtosecond optical frequency comb-based tandem interferometer, Journal of the
European Optical Society 4, 2009, 09042 1-4[PDF File]
- D. Wei, S. Takahashi, K. Takamasu, H. Matsumoto: Experimental observation of
pulse trains' destructive interference with a femtosecond optical
frequency-comb-based interferometer, Optics Letters 34 (18), 2009, 2775-2777[PDF File]
- S. Usuki, H. Nishioka S. Takahashi, K. Takamasu: Experimental verification
of super-resolution optical inspection for semiconductor defect by using
standing wave illumination shift, International Journal of Advanced
Manufacturing Technology 46 (9-12), 2010 863-865[PDF File]
- S. Liu, K. Watanabe, S. Takahashi, K. Takamasu: Intelligent Profile Measurement
for Wide-Area Resist Surface Using Multi-Sensor AFM System, Key Engineering
Materials Vols. 381-382, 2008, 407-410 [PDF File]
- X. Chen, K. Takamasu: Study on Scanning Squareness Measurement Method and
Uncertainty Estimation, Key Engineering Materials Vols. 381-382, 2008,
569-572 [PDF File]
- M. Nara, M. Abbe, K. Takamasu: Uncertainty Estimation Using Monte-Carlo Method Constrained by Correlations of the Data, Key Engineering Materials Vols. 381-382, 2008, 587-590 [PDF File]
- 臼杵深,西岡宏晃,高橋哲,高増潔:変調照明シフトによる超精密加工表面の超解像光学式欠陥計測に関する研究(第1報)−解像特性の理論的検討−,精密工学会誌,74
(5),2008,498-503 [PDF File]
- 臼杵深,西岡宏晃,高橋哲,高増潔:変調照明シフトによる超精密加工表面の超解像光学式欠陥計測に関する研究(第2報)−定在波照明シフト実験による解像原理の実験的検証−,精密工学会誌,74
(6),2008,581-586 [PDF File]
- Yusuke Kajihara, Toru Takeuchi, Satoru Takahashi, Kiyoshi Takamasu: Development of an In-process Confocal Positioning System for Nanostereolithography Using Evanescent Light, International Journal of Precision Engineering and Manufacturing, 9 (3), 51-54, 2008[PDF File]
- K. Takamasu, S. Takahashi, M. Abbe, R. Furutani: Uncertainty estimation for coordinate metrology with effects of calibration and form deviation in strategy of measurement, Meas. Sci. Technol. 19 (8), 2008, 084001[PDF File]
- S. Takahashi, S. Okada, H. Nishioka, S. Usuki, K. Takamasu: Theoretical
and numerical analysis of lateral resolution improvement characteristics
for fluorescence microscopy using standing evanescent light with image
retrieval, Meas. Sci. Technol., 19 (8), 2008, 084006[PDF File]
- Hirokazu Matsumoto, Kaoru Sasaki, Akiko Hirai: Remote Measurement of Refractive Index of Air Using Tandem Interferometer over Long Optical Fiber, Japanese Journal of Applied Physics, Vol. 47, No. 9, 2008, 7386-7389[PDF File]
- Hirokazu Matsumoto, Kaoru Sasaki: Remote Measurement of Practival Length Standards Using Optical Fiber Networks and Low-Coherence Interferometers, Japanese Journal of Applied Physics, Vol. 47, No. 11, 2008, 8590-8594[PDF File]
- Shin Usuki, Hiroaki Nishioka, Satoru Takahashi, Kiyoshi Takamasu: Experimental verification of super-resolution optical inspection for semiconductor defects by using standing wave illumination shift, International Journal of Advanced Manufacturing Technology, 2009, DOI:10.1007/s00170-008-1901-y[PDF File]
- Masao Sugi, Ippei Matsumura, Yusuke Tamura, Makoto Nikaido, Jun Ota, Tamio Arai, Kiyoshi Kotani, Kiyoshi Takamasu, Hiromasa Suzuki, Akio Yamamoto, Yoichi Sato, Seiichi Shin, Fumihiko Kimura: Quantitative Evaluation of Automatic Parts Delivery in "Attentive Workbench" Supporting Workers in Cell Production, Journal of Robotics and Mechatronics, Vol.21 No.1, 2009, 135-145[PDF File]
- Shujie Liu, Kentaro Watanabe, Xin Chen, Satoru Takahashi, Kiyoshi Takamasu: Profile measurement of a wide-area resist surface using a multi-ball cantilever system, Precision Engineering 33, 2009, 50-55[PDF File]
- 高橋哲:4編 先端イメージング技術の開発研究 2章 3節 近接場光を利用した半導体ウエハ基板表面の非破壊評価,ナノイメージング NTS,2008,206-20
- 高増潔:5章5節 計測評価システム 5.1 形状測定機,吉本成香編 実用 精密位置決め技術辞典,専業技術サービスセンター,2008,296-302
- K. Kotani, M. Tachibana, K. Takamasu: Respiratory-phase Domain Analysis
of Heart Rate Variability can Accurately Estimate Cardiac Vagal Activity
during a Mental Arithmetic Task, Methods of Information in Medicine 2007
46 3: 376-385, 2007, 376-385[PDF File]
- 陳欣,小谷潔,高増潔:空間周波数領域2点法に関する研究(第1報)−2組の2点法を組合わせる場合の系統誤差の補正−,精密工学会誌,73(6), 2007, 653-658[PDF File]
- 大西徹,高瀬省徳,高増潔:現場環境における三次元測定機の高度化に関する研究(第2報)−直角誤差補正−,精密工学会誌,73(7), 2007, 818-822[PDF File]
- 梶原優介,稲月友一,高橋哲,高増潔:エバネッセント光を利用したナノ光造形法に関する研究(第2報)−定在エバネッセント光を利用した微細周期構造創製−,精密工学会誌,73(8), 2007, 934-939[PDF File]
- 小谷潔,飯田文明,赤川智洋,斉藤毅,神保泰彦,河口洋一郎,高増潔:体動の影響下におけるリアルタイム副交感神経活動推定法の開発とインタラクティブCGの生成,電気学会論文誌C,127(10), 2007, 1762-1769[PDF File]
- Kiyoshi Kotani, Kiyoshi Takamasu, Yasuhiko Jimbo, Yoshiharu Yamamoto: Postural-induced phase shift of respiratory sinus arrhythmia and blood pressure variations: insight from respiratory-phase domain analysis, American Journal of Physiology-Heart and Circulatory Physiology 294:1481-1489, 2008, 1481-1489[PDF File]
- Y. Kajihara, Y. Inazuki, T. Takeuchi, S. Takahashi, K. Takamasu: Evanescent light photopolymerization and measurement of cure depth in nanostereolithography, Applied Physics Letters 92, 093120, 2008, 093120 1-3[PDF File]
- 高橋哲:16.8 加工計測, 日本機械学会誌「機械工学年鑑」加工学・加工機器, 2007, 61-62
- 高増潔:5.2.3 形状, 日本機械学会編:機械工学便覧デザイン編β5 計測工学, 2007, 66-71
- 高増潔(Supervisor):Academic Groove, The University of Tokyo, 東京大学, 2008
- 吉岡淑江,三好隆志,高谷裕浩,高橋哲:輪帯エバネッセント照明による回路パターン付きSiウエハの表面異物欠陥検出法に関する研究(第1報)−欠陥検出原理とその検証実験,精密工学会誌,72(7),2006,878-883
- 梶原優介,稲月友一,高橋哲,高増潔:エバネッセント光を利用したナノ光造形法に関する研究(第1報),精密工学会誌,72(11),2006,1391-1396
[PDF File]
- Shujie Liu, Shuichi Nagasawa, Satoru Takahashi, Kiyoshi Takamasu: Development of a Multi-Ball-Cantilever AFM for Measuring Resist Surface, Journal of Robotics and Mechatronics, Vol. 18, No. 6, 2006, 698-704
- 陳欣,高増潔,小谷潔,石田敏博:平面リニアモータの精度校正に関する研究(第1報)−反射ミラーの形状計測−,精密工学会誌,72(12),2006,1542-1546
[PDF File]
- 大西徹,高瀬省徳,高増潔:現場環境における三次元測定機の高度化に関する研究(第1報)−温度ドリフトの評価および補正,精密工学会誌,73(2),2007,270-274
[PDF File]
- K. Kotani, M. Tachibana, K. Takamasu: Investigation of the Influence of
Swalloing, Coughing and Vocalizationon Heart Rate Variability with Respiratory-phase
Domain Analysis, Methods of Information in Medicine, 46 (2), 2007, 179-185
[PDF File]
- 高増潔:10.2 加工部品の測定,日本機械学会編:機械工学便覧デザイン編β3 加工学・加工機器,2006,222-229
- 高増潔:7.加工評価 7.1 評価項目とその定義,竹内芳美,青山藤詞郎,新野秀憲,光石衛,国枝正典,今村正人,三井公之(編集),機械加工ハンドブック,朝倉書店,2006,437-450
- 高橋哲:11 寸法・形状・粗さを測る 光を用いた計測手法,砥粒加工学会編:図解 砥粒加工技術のすべて,2006,206-207
- 小谷潔,斉藤毅,立花誠,高増潔:リアルタイム呼吸性洞性不整脈抽出法を用いた作業負荷の制御,生体医工学,43(2),2005,252-260
- 高増潔,佐藤理,下嶋賢,古谷涼秋:座標測定機のアーティファクト校正(第3報)−校正後の測定の不確かさの推定−,精密工学会誌,71(7),2005,890-894
[PDF File]
- Chanin Sinlapeecheewa, Kiyoshi Takamasu: 3D profile measurement using color
multi-line stripe pattern with one shot scanning, Integrated Computer-Aided
Engineering, 12 (4), 2005, 333-341 [PDF File]
- T. Ha, T. Miyoshi, Y. Takaya, S. Takahashi: Laser Scattering Measurment of Microdefects on Silicon Oxide Wafer, Key Engineering Materials Vols. 295-296, 2005, 3-8
- S. Takahashi, R. Nakajima, T. Miyoshi, Y Takaya, K. Takamasu: Development of an Evanescent Light Measurement System for Si Wafer Microdefect Detection, Key Engineering Materials Vols. 295-296, 2005, 15-20
- S. Usuki, K. Enami, M. Hiraki, S. Takahashi, K. Takamasu: Theoretical Analysis and Basic Experiments for the 3D Displacement Measurement Using Ring-Shaped Laser Beam, Key Engineering Materials Vols. 295-296, 2005, 295-300
- X. Chen, K. Takamasu, M. Nikaidou: Evaluation of Thrust Force and Positioning Accuracy of a New Linear Motor, Key Engineering Materials Vols. 295-296, 2005, 613-618
- Kiyoshi Kotani, Zbigniew R. Struzik, Kiyoshi Takamasu, H. Eugene Stanley, Yoshiharu Yamamoto: Model for complex heart rate dynamics in health and diseases, Physical Review E, Vol. 72, 041904, 2005, 1-8 [PDF File]
- 高増潔,阿部誠,古谷涼秋,大園成夫:形体計測における不確かさの見積り(第3報)−区分多項式による直線形体の形状偏差モデル−,精密工学会誌,71(11),2005,1454-1458
[PDF File]
- Ichiko Misumi, Satoshi Gonda, Tomizo Kurosawa, Yasushi Azuma, Toshiyuki Fujimoto, Isao Kojima, Toshihisa Sakurai, Tadahiro Ohmi, Kiyoshi Takamasu: Reliability of parameters of associated base straight line in step height samples: Uncertainty evaluation in step height measurements using nanometrological AFM, Precision Engineering, 30, 2006, 13-22 [PDF File]
- 臼杵深,侯冰,清澤圭太朗,江並和宏,平木雅彦,高橋哲,高増潔,大園成夫:リングビームを用いた三次元変位測定法(第2報)−リングイメージの楕円近似による非線形性の改善−,精密工学会誌,72(1),2006,132-136
[PDF File]
- 小谷潔:実生活モニタリングデータの解析の現状と展望−心拍変動の解析から−,ユビキタス・バイオセンシング−健康モニタリング&日常ケアのための計測技術−(三林浩二監修,シーエムシー出版),2006,229-238
- Masao Sugi, Yusuke Tamura, Makoto Nikaido, Jun Ota, Tamio Arai, Kiyoshi Takamasu, Kiyoshi Kotani, Akio Yamamoto, Hiromasa Suzuki, Yoichi Sato, Fumihiko Kimura, Seiichi Shin: Human Supporting Production Cell "Attentive Workbench", Intelligent Autonomous Systems 9 (IAS-9), edited by T. Arai et al., IOS Press, 2006, 740-747
- Mihoko Otake, Ryo Fukano, Shinji Sako, Masao Sugi, Kiyoshi Kotani, Junya Hayashi, Hiroshi Noguchi, Ryuichi Yondea, Kenjiro Taura, Nobuyuki Otsu, Tomomasa Sato: Autonomous Collaborative Environment for Project Based Learning, Intelligent Autonomous Systems 9 (IAS-9), edited by T. Arai et al., IOS Press, 2006, 756-763
- Gheorghe Olea, Kiyoshi Takamasu, Benoit Raucent: Precision Multi-Degrees-Of-Freedom
Positioning Systems - Modular Design For Assembly Applications -, Precision
Assembly Technologies for Mini and Micro Products, edited by Svetan Ratchev
(IFIP (International Federation for Information Processing) series Vol.
198), 2006 [IPAS 2006での発表と同じ] [PDF File]
- 高増潔,小谷潔(東京大学21世紀COE実世界情報プロジェクト,佐藤知正編著):人と共存するコンピュータ・ロボット学(実世界情報システム),オーム社,2004,177-195
- A. Taguchi, T. Miyoshi, Y. Takaya, S. Takahashi: Optical 3D profilometer
for in-process measurement of microsurface based on phase retrieval technique,
Precision Engineering,28(2), 2004, 152-163 pdf file
- 佐藤理,高増潔,無類井格,Gheorghe Olea:パラレルメカニズムを用いたマイクロフライス盤の開発(第1報,設計パラメータの決定と試作機の製作),設計工学,39(4),
2004,175-181
- 高増潔,佐藤理,Chanin Sinlapeecheewa,下嶋賢,古谷涼秋:座標測定機のアーティファクト校正(第2報)−冗長座標測定機の自己校正−,精密工学会誌,70(5),2004,711-715
pdf file
- O. Sato, K. Shimojima, R. Furutani, K. Takamasu: Artifact calibration of
parallel mechanism, kinematic calibration with a priori knowledge, Measurement
Science and Technology, 15(6), 2004, 1158-1165 pdf file
- 小谷潔,古川健太,高増潔:嚥下の心拍変動に与える影響の呼吸位相領域における解析,生体医工学,42(2),2004,61-65 pdf file
- Jonghan Jin, I. Misumi, S. Gonda, T. Kurosawa: Pitch measurement of 150
nm 1d-Grating standards using an nano-metrological atomic force microscope,
Int. Journal for the Korean Society of Precision Engineering, 5(3), 2004,
19-25
- Taeho Keem, S. Gonda, I. Misumi, Qiangxian Huang, T. Kurosawa: Removing
nonlinearity of a homodyne interferometer by adjusting the gains of its
quadrature detector systems, Applied Optics,43(12), 2004, 2443-2448 pdf file
- I. Misumi, S. Gonda, T. Kurosawa, K. Takamasu: Uncertaity in pitch measurements
of one-dimensional grating standards using a nanometrological atomic force
microscope, Meas. Sci. Technol. 14 (4), 2003, 463-471 PDF File
- 高増潔,野坂健一郎,阿部誠,古谷涼秋,大園成夫:形体計測における不確かさの見積り(第2報)−円形体の計測における形状偏差の寄与−,精密工学会誌,69(5),2003,693-697 PDF File
- M. Abbe, K. Takamasu, S. Ozono: Reliability on calibration of CMM, Measurement
33 (4), 2003, 359-368 PDF File
- 郭志徹,高増潔,山本明弘,和田智之,洲之内啓,加瀬究,田代英夫:波長走査干渉計における信号処理,精密工学会誌,69(6),2003,831-835
PDF File
- 下嶋賢,古谷涼秋,大園成夫,高増潔,平木雅彦,荒木健司:3次元測定機の不確かさ推定に関する研究(第1報)−多関節型3次元測定機の機構パラメータの算出と不確かさ推定−,精密工学会誌,69(6),2003,841-845
- 高増潔,古谷涼秋,下嶋賢,佐藤理:座標測定機のアーティファクト校正(第1報)−運動学パラメータの校正−,精密工学会誌,69(6),2003,851-855 PDF File
- Taeho Ha, Takashi Miyoshi, Yasuhiro Takaya, Satoru Takahashi: Size determination of microscratches on silicon oxide wafer surface using scattered light, Precision Engineering,27 (3), 2003, 265-272
- 小谷潔,古川健太,高増潔:呼吸情報に着目した高精度な呼吸性洞性不整脈の抽出法,生体医工学,41(3),2003,197-204
- 中島隆介,高橋哲,三好隆志,高谷裕浩:赤外エバネッセント光によるシリコンウエハ加工表面層欠陥検出に関する研究(第1報)−理論的・実験的検討−,精密工学会誌,69(9),2003,1291-1295
- 西野秀昭,三好隆志,高谷裕浩,高橋哲,林照剛,木村景一:液晶マスクを用いた非積層マイクロ光造形法に関する研究(第2報)−液晶動画像を用いた薄層型積層造形,精密工学会誌,69(10),2003,1417-1422
- 江並和宏,臼杵深,平木雅彦,高橋哲,高増潔,大園成夫:リングビームを用いた三次元変位測定法(第1報)−理論解析と基礎実験−,精密工学会誌,69(12),2003,1764-1768
PDF File
- I. Misumi, S. Gonda, T. Kurosawa, Y. Tanimura, N. Ochiai, J. Kitta, F.
Kubota, M. Yamada, Y. Fujiwara, Y. Nakayama, K. Takamasu: Submicrometre-pitch
intercomparison between optical diffraction, scanning electron microscope
and atomic force microscope, Meas. Sci. Technol. 14 (12), 2003, 2065-2074
PDF File
- 佐藤理,下嶋賢,古谷涼秋,高増潔:パラレルメカニズムのアーティファクト校正(第1報)−緩い束縛条件を用いた運動学パラメータの校正−,精密工学会誌,70(1),2004,96-100 PDF File
- 佐藤理,Gheorghe Olea,平木雅彦,高増潔:パラレルメカニズムを用いた三次元測定機の校正−複数のリンクセットを用いた校正−,精密工学会誌,70(2),2004,214-218
PDF File
- K. Kotani, K. Takamasu, Y. Ashkenazy, H. Stanley and Y. Yamamoto: Model
for Cardiorespiratory Synchronization in Humans, Physical Review E, Vol.
65, 051923, 2002, 1-9
PDF File
- K. Kotani, K. Takamasu, Y. Ashkenazy, H. Stanley and Y. Yamamoto: Model
for Cardiorespiratory Synchronization in Humans, Virtual Journal of
Biological Physics Research. Volume 3, Issue 11, 2002(Physical
Reviewと同じもの)
- M. Hiraki, K. Enami, K. Takamau, S. Ozono: Omni-Directional Obstracle
Detection, European Journal of Automation, Vol. 36, 9, 2002, 1221-1234
- 木村景一,三好隆志,高谷裕浩,高橋哲:光放射圧制御微粒子集積現象に基づくCMP加工に関する基礎的研究,精密工学会誌,69(1),2003,89-94
- 川合知二,高増潔他:図解 ナノテク活用技術のすべて:工業調査会,2002,56-58
- 阿部誠,高増潔,大園成夫:座標比較によるCMM校正システムの開発(第1報)−試作システムの構成とその基本的な評価−,精密工学会誌,67(4),2001,638-643
PDF File
- 阿部誠,高増潔,大園成夫:座標比較によるCMM校正システムの開発(第2報)−校正の信頼性の統計的な評価−,精密工学会誌,67(6),2001,976-981
PDF File
- 郭志徹,高増潔,山本明弘,和田智之,須之内啓,加瀬究,田代英夫:波長走査干渉計における波長掃引の校正,精密工学会誌,68(3),2002,392-396
PDF File
- M. Fujiwara, A. Yamaguchi, K. Takamasu and S. Ozono: Evaluation of Stages
of Nano-CMM, Initiatives of precision engineering at the beginning of a
millennium (edited by Ichiro Inasaki), Kluwer Academic Publishers
(Netherlands), 2001, 634-638 PDF
File
- O. Sato, M. Hiraki, K. Takamasu and S. Ozono: Calibration of 2-DOF Parallel
Mechanism, Initiatives of precision engineering at the beginning of a millennium
(edited by Ichiro Inasaki), Kluwer Academic Publishers (Netherlands),
2001, 734-738 PDF
File
- 高増潔,阿部誠,古谷涼秋,大園成夫:形体計測における不確かさの見積り(第1報)−校正作業で生じる系統誤差の寄与−,精密工学会誌,67(1),2001,pp.
91-95 PDF File
- 郭志徹,高増潔,平木雅彦,古谷涼秋,大園成夫:吸気型ボールプローブの開発(第2報)−空気トリガセンサ式プローブの評価実験−,精密工学会誌,66(4),2000,pp. 612-616 PDF File
- 阿部誠,高増潔,大園成夫:空間座標の比較測定によるCMMの校正(第2報)−パラメトリックエラー推定値の信頼性−,精密工学会誌,66(4),2000,pp.
578-582
PDF File
- K.
Kotani, I. Hidaka, Y. Yamamoto and S. Ozono: Analysis of Respiratory
Sinus Arrhythmia with Respect to Respiratory Phase, Method Information
in Medicine, 39, 2000, pp. 153-156
- J.Lenarcic, G.Olea, K.Takamasu et al: Advances in Robot Kinematics, Kluwer Academic Publishers, 2000, pp. 403-410
- 石井明,高増潔他:画像処理応用システム,東京電機大学出版局,2000,182-190
- Kiyoshi Takamasu, Kuo Chih-Che, Akihiro Suzuki, Masahiko Hiraki, Ryoshu Furutani, Shigeo Ozono: Development of a Pneumatic Ball Probe (1st Report) - Basic Construction -, Int. J. Jpn. Soc. Prec. Eng., 33 (3), 1999, pp. 233-238. PDF
File
- Sonko
Osawa, Ryoshu Furutani, Kiyoshi
Takamasu, Shigeo Ozono, Hidemitsu Asano: 3-D shape measurement by
self-referenced pattern projection method,
Measurement, 26 (3), 1999, pp. 157-166.
- Kiyoshi Takamasu, Ryoshu Furutani, Shigeo
Ozono: Basic Concept of Feature-Based Metrology, Measurement, 26 (3),
1999, pp. 151-156. PDF File
- 阿部誠,高増潔,大園成夫,沢辺雅二:空間座標の比較測定によるCMMの構成(第1報)−パラメトリックエラーモデルの構成とそのシミュレーション−,精密工学会誌,66(3),2000,pp.
483-488.
- 高増潔,古谷涼秋,大園成夫:最小領域法の座標計測における統計的評価,精密工学会誌,64(4),1998,pp.557-561.PDF
File
- 高増潔,郭志徹,鈴木昭洋,平木雅彦,古谷涼秋,大園成夫:吸気型ボールプローブの開発(第1報)−基本的構成−,精密工学会誌,64(8),1998,pp.1153-1157.PDF
File
- 大澤尊光,浅野秀光,古谷涼秋,高増潔,大園成夫:多値パターン投影による三次元形状測定(第3報)−自己参照パターン投影法−,精密工学会誌,64(2),1998,pp.236-240.
- 高増潔,古谷涼秋,大園成夫:座標計測における形体パラメータの信頼性,精密工学会誌,63(11),1997,pp.1594-1598.PDF
File
- 高増潔,古谷涼秋,大園成夫:最小二乗法による円筒形体の計算における初期値の決定,設計工学,32(11),1997,pp.436-441.
- 高増潔,郭必偉,古谷涼秋,大園成夫:形体計測の基本概念,精密工学会誌,64(1),1998,pp.94-98.
PDF File
- R. Furutani, H. Asano, K. Takamasu, S. Ozono: 3D Profile measurement using a multi-gray
scale compared with reference projections, Measurement, 20 (2), 1997, pp.129-134.
- Yuki Cheng, Kiyoshi Takamasu, Shigeo Ozono: Sensing Behavior and Evolving
Model, J. Graduate School and Faculty of Engineering, The University of
Tokyo (B), XLIC (2), 1997, pp.77-87.
- 大園成夫,下河辺明,高増潔他,精密測定機器の選び方・使い方,日本規格協会,1997,pp.1-367.
- Kiyoshi Takamasu, Iturou Fukuda, Ryoshu Furutani, Junhee Hong, Shigeo Ozono, Data
Processing Method for Geometrical Forms with Form Deviations in Coordinate Metrology,
Computer-Aided Tolerancing, 1996, Chapman & Hall, pp.273-282.
- 高増潔,福田逸郎,古谷涼秋,洪俊憙,大園成夫,座標計測における幾何偏差を含んだ形体間演算,精密工学会誌,62(7),1996,
pp.964-968.
- 浅野秀光,大澤尊光,古谷涼秋,高増 潔,大園成夫,上川哲生,多値パターン投影による3次元形状測定(第2報) −空間符号化の信頼性向上−,精密工学会誌,62(6),1996,pp.830-834.PDF
File
学術論文および著書:1995年度以前(高増が関係した主な論文) |
- Shigeo Ozono, Kiyoshi Takamasu, Data Processing and Calibration of Coordinate Measuring Machine, Int. J. Jpn. Soc. Prec. Eng., 29(2), 1995, pp.105-108.
- 大澤尊光,古谷涼秋,川上和彦,高増 潔,大園成夫,上川哲生,多値パターン投影による3次元形状測定,精密工学会誌,61(8),1995,pp.101-110.
- 高増 潔,形状測定におけるソフトウェアの問題点,精密工学会誌,61(8),1995,pp.1049-1055.
- Shigeo Ozono, Kiyoshi Takamasu, Data Processing and Calibration of Coordinate Measuring
Machine, Int. J. Jpn. Soc. Prec. Eng., 29(2), 1995, pp.105-108.
- 洪 俊憙,川上和彦,古谷涼秋,高増 潔,大園成夫,測定データから抽出した幾何パラメータによる加工工程の管理手法,精密工学会誌,61(12),1995,pp.1710-1715.
- Kiyoshi Takamasu, Developments of Coordinate Measuring Machine in Production,
J. of Qualitech and Automation, 18(5), 1994, pp.38-42.
- 高増 潔,加藤純一,オプトメカトロニクスにおけるフレキシブル光計測,精密工学会誌,58(3),1992,pp.422-425.
- Kiyoshi Takamasu, Measurement System for Multiple Degree of Freedom Moving Robot, J.
Robotics Mechatronics, 5(5), 1993, pp.453-456.
- 高増 潔,デジタル光学素子を用いた形状測定方法の研究(第1報)−反射物体の形状測定−,精密工学会誌,56(6),1990,pp.1117-112.
- 古谷涼秋,斎藤隆行,加藤純一,大園成夫,高増 潔,3次元形状の評価法,精密工学会誌,54(5),1988,pp.890-895.
- 志沢雅彦,加藤純一,大園成夫,高増 潔,ディジタルPLLを用いたしま画像からの実時間形状復元処理,精密工学会誌,52(2),1987,pp.334-339.
- 高増 潔,加藤純一,大園成夫,移動ロボット用環境センサの研究,日本ロボット学会誌,5(3),1987,pp.199-202.
- Kiyoshi TAKAMASU, Shigeo OZONO, Graphical Analysis of Space Coordinate Data to Determine
the Spatial Position and Form of a Three-Dimensional Object, Precision Machinery and
Mechaoptoelectronics, 12, 1986, pp.150-155.
- 高増 潔,大園成夫,図面空間の認識
−測定のための図面処理の手法−,精密工学会誌,52(2),1986,pp.300-305.
- 若林秀樹,加藤純一,高増 潔,大園成夫,ホログラフィによる微粒子計測の自動化に関する基礎研究,精密工学会誌,52(7),1986,pp.1187-119.
- 薛 軍,大園成夫,高増 潔,三次元座標測定機の案内精度の測定試験と精度検討,精密機械,50(3),1984,pp.556-560.
- 高増 潔,大園成夫,最小二乗法によるデ−タム平面の決定方法,精密機械,51(3),1985,pp.563-568.
- 高増 潔,加藤純一,大園成夫,高速A/D変換器をパ−ソナルコンピュ−タへ接続した計測システム,精密機械,51(10),1985,pp.1830-183.
- Junichi KATO, Kiyoshi TAKAMASU, Shigeo OZONO, Investigation on Material Expulsion
Mechanism in Laser Drilling Using Modelled Work Piece, Bull.Jpn. Soc, of Prec. Engg.,
19(2), 1985, pp.133-134.
|
|